Home         Mission         Splitboard 101         Splitboard Forum         Splitboard Shop         Resources         Videos         Galleries         About 

 

If you have questions or comments about this story or would like to make a comment, please visit our forum here:

Between expanding their facility and designing new splitboard products, Voile has been busy. The Salt Lake City, UT based company announced two new splitboard-specific bindings and dual-height climbing bars today. Check out their site and info below for more!

Light Rail Splitboard binding


Simplify, reduce weight, and increase performance of your Voile splitboard binding system with the new Voile Light Rail splitboard binding. The Voile Light Rail integrates the Slider Track and Strap Binding into a lightweight, low profile, and stiff splitboard binding.


The binding baseplate is cut away to eliminate ice build-up and reduce weight. The baseplate aluminum rails are CNC machined from solid 7075-T6 bar stock aluminum for amazing durability.


An Avalanche Rip Cord has been attached to both quick release buckles to aid when backcountry riding in avalanche prone areas.


The Voile Light Rail works with current Voile Slider Pins. Two Slider Pins w/lanyards are included with pair of Light Rail splitboard bindings.

Trax Splitboard binding


A lightweight and inexpensive way to upgrade your current Voile splitboard binding system.


Bolt the Voile Trax splitboard binding to your existing Voile Slider Track, with included t-nuts and screws.


The Trax binding baseplate brings your binding closer to the board and with 4 points of contact on the outer edges of the baseplate it is as stiff as the Voile Light Rail splitboard binding.


An Avalanche Rip Cord has been attached to both quick release buckles to aid when backcountry riding in avalanche prone areas.

Splitboard Dual-height Climbing bars


Upgrade your splitboard with the new Voile splitboard dual height climbing bars. The back climbing wire is the standard height of 55mm and the front wire is 75mm.


Also new, a durable plastic coating is applied to the top of each wire to prevent wear on your splitboard binding base plate.


Includes 1 pair of dual height climbing bars and screws to mount to an inserted, factory-built splitboard.