Splitboard.com Forums

I don't know if this is already in the TLT5 thread but I don't remember seeing it.

Used to be it was B&D making a compatible crampon.
Dynafit now makes them up to 130mm

http://www.dynafit.com/product/bindings/dynafit-crampon

Unfortunately I have about a 132 width waist.
Going to bend em or dremel out some material.

Anyone with a similar experience?

Made my own





Old pair of Burton crampons
Remove some material.
Had to make a clap for fixed mode, but they work great.

Cheers

Wow. Good idea, firstlight. Might have found a use for my old burton crampons that I've never even managed to give away, let alone use.

It seems to me, that the new Sabretooth crampons from Spark R&D for the Tesla system will be dynafit compatible and in the widths 138mm and 148mm

FaDe
Already inquired about this and they are not compatible but they may be making on to suit!
The boot length variation will be the issue with it in fixed mode.
I came across this when I made mine and has to make custom tongues to suit my boot length.

Fingers crossed they come up with something that will work on most boot shell sizes